Mode d'emploi Alisun Salsa 12 Solarium - Notice page 6

Téléchargez votre notice Mode d'emploi Alisun Salsa 12 Solarium - Notice page 6! Téléchargement gratuit sans inscription des documents PDF pour mieux utiliser votre Mode d'emploi Alisun Salsa 12 Solarium - Notice page 6 : mode d'emploi, notice d'utilisation, manuel d'instruction.
ACRYLIC SHEET
The acrylic sheet should only be removed
when the equipment is at room
temperature.
1.
Should you need to remove the acrylic
sheet, you must proceed as follows:
Remove the plug from the power
socket.
Unscrew the 4 screws (A) in the end
piece (B).
Slide the end piece out of the canopy.
Repeat this procedure with the end
piece at the other end of the equipment.
Now rotate the canopy as far as it will
go, so that the lamps are facing
upwards.
2.
Carefully free one side of the acrylic
sheet (A) by pulling it out of the plastic
profile (B).
Now pull the acrylic sheet towards you
such that it slides out of the plastic
profile at the other side.
3.
When replacing the acrylic sheet, proceed
as follows:
Slide the acrylic sheet into the groove in
the plastic profile at one side.
Press down on the centre of the acrylic
sheet then slide its free edge into the
groove in the plastic profile on the other
side.
Next rotate the canopy all the way
back, such that the lamps are facing
downwards again.
Now fit both end pieces using the 4
screws.
PARTS
Use only original Alisun replacement parts:
Part
Art.no.
Brilliant
Sun plus XT 100W
350377
GoldSun
DuoTan®
Professional 100W
350366
Reflector Salsa 10/12
332220
Timer
355005
This equipment's mains lead may only be
replaced by
authorized
personnel.

LAISSER UN COMMENTAIRE

Partages